• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Radar Maintenance and Parts Manuals > > CHAPTER 4.
Dust Filter Cleaning Instructions.
Bulk and Consumable Materials. - TB-11-5840-384-200026

TB-11-5840-384-20 Radar Set AN/TPN-18ANSN 5840-01-070-9415 Landing Control Central AN/TSQ-71/BNSN 5895-01-092-8074 Manual
Page Navigation
  14    15    16    17    18  19  20    21    22    23    24  
TB 11-5840-384-20
CHAPTER 4.
1. Purpose. Provide a cleaning requirement to remove salt / salt laden sand and other corrosive
contaminates from TAIS returning from OCONUS Desert Operations. Environmental conditions within the
Southwest Asia (SWA) theater of operations were conducive to the introduction of salt laden sand and
other corrosive substances into the interior surfaces of the TAIS. These substances, if allowed to remain
will accelerate the corrosion process and lead to premature corrosion damage. Immediate removal of
these Substances is imperative in order to minimize future corrosion damage. This Technical Bulletin (TB)
is issued to provide special inspection and cleaning procedures for all deployed/redeployed TAIS.
2. Priority Classification. NORMAL.
a.
Equipment In Use. No later than 30 days after redeployment from Desert operations. Deployed TAIS
will complete cleaning procedures as necessary but as a minimum at next PMCS.
b.
Equipment in Storage. No later than 30 clays after redeployment from Desert Operations. Equipment
deployed will complete cleaning procedures as necessary but as a minimum quarterly.
3. End Items to be Inspected. All TAIS after redeployment from Desert operations. Deployed TAIS will
complete requirements as necessary but at a minimum at next PMCS.
4. Assembly Components to be Inspected. Not applicable
5. Parts to be inspected. Not applicable.
6. Application.
a. Category of Maintenance - Organizational/Direct Support (UNIT Level).
b. Time Required. As required to comply with this TB.
c.
Estimated Cost Impact of Stock Fund Items to the Field. Not applicable.
d. TB / MWOs applied prior to or concurrently with this inspection. Not applicable.
e. Publications which require change as a result of this inspection. Not applicable.
7. Supply / Parts and Disposition.
a. Parts Required. Not applicable.
b. Requisitioning Instructions. Requisition materials through normal supply channels using normal supply
procedures. Requests should be the highest priority authorized by Force Activity Designator (FAD). If
the delivery is forecasted to be in excess of 21 days; or if materials are not received within 21 days of
ordering contact your local GSA Customer Service Center DSN 695-4865 as appropriate to specific
item of concern. If unable to requisition items within the allotted time frame contact one of the POCs
listed in this TB.
1-19






Western Governors University
< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.