Quantcast LANDING CONTROL CENTRAL - TM-11-487C-10380

Custom Search
 
  
 
Volume 1
MIL-HDBK-162A
Section 1
15 December 1965
ITEM NAME: LANDING CONTROL CENTRAL
TYPE: AN/MPN-14
approaching or departing from an airfield.
At 25, 000 ft, at least 35 naut mi
Coverage
RELATION TO SIMILAR EQUIPMENT
Azimuth: 360 deg
The AN/MPN-14 is similar to the AN/MPN-16,
Elevation: Cosecanting to 45 deg
difference is in production models. TheAN/MPN-14 and
Accuracy
AN/MPN-16  are  similar  to  the  AN/MPN-13  and
Azimuth: 1 deg when target range is
AN/MPN-15, difference is the mobile RAPCON used
more than 10 pct of indicator range.
with the AN/MPN-14 and AN/MPN-16 but not with the
Range: 4 pct when target range is more
AN/MPN-13 and AN/MPN-15.  The AN/MPN-14 is a
than 20 pct of indicator range setting.
basic AN/MPN-13 with a mobile RAPCON added. Also,
Resolution
to adapt it for use with the mobile RAPCON, the radar
Azimuth: 2.3 deg when target range is
set has been modified to remote search and precision
more than 30 pct of indicator range setting.
indicating functions, performance monitoring signals,
Range: 675 ft target separation or
and communications control to the RAPCON van.
1 pct of indicator range setting, whichever is
Additional uhf radio sets have been installed, new
greater.
telephone facilities have been provided, and two-way
PRF: 1100 pps plus or minus 2 pct
intercom  stations  have  been  added  to  facilitate
Amplitude (terminated in 100 ohms): 35v
maintenance of the equipment. The AN/MPN-13 is a
min for at least 0.5 usec at 50 pct of peak
basic  AN/CPN-4,  AN/MPN-11A,  AN/MPN-11B,  or
amplitude.
AN/MPN-11C,  difference  is  an  improved  model
Rise Time: 400v per usec min
incorporating recent changes such as extended range
Indicator Characteristics (Search Radar)
coverage, additional search cursors, improved receiver
Display
design, and monitoring of the power output, relative
Type: 12 in. ppi
tuning, and noise figure characteristics.
Information: Normal and MTI video,
TECHNICAL DESCRIPTION
range marks, angle marks, cursors, and IFF/SIF
Primary AC Power
video.
Requirement: 120/208v, 4-wire, 3 ph,
Sweeps: Rotating linear sweep synchronized with
60 cps, 30 kw (min) RAPCON trailer
antenna scan
only, 66 kw including radar set,
Ranges
regulated to 117 plus or minus 2v
Range Marks: 5, 10, 20, 40, 60, and
for input of 106-132v
200 naut mi
Source: Government furnished diesel-
Range Mark Calibration:
engine generator or commercial
2-mi intervals on 5- and 10-mi ranges
DC Power
5-mi intervals on 20- and 40-mi ranges
Requirement: plus 28v
10-mi intervals on 60-mi range
Source: plus 28v, 50 amp power supply
50-mi intervals on 200-mi range
in RAPCON trailer, or batteries in
Off-Centering: Sweep center may be moved
power trailer at 10 amp max for
to edge of display, approximately doubling range up
emergency conditions.
to 60 mi max in sector displayed except for 40-, 60-,
Communication Frequency
and 200-mi ranges.
Transmitting and Receiving:
Angle Marks: At -5 deg, O deg, and plus
100 to 156 mc and
15 deg to indicate outline of precision azimuth
225 to 399.9 mc
coverage with respect to runway parallel.
General Operating Characteristics
Electronic Cursors: Two (or three if 3rd
(Search Radar)
Indicator is used) separate cursors to indicate
Frequency Range: 2780 to 2820 mc
desired flightpaths.
Power Output: 600 kw (peak)
Maps: Navigation head and compass rose
Range (determined with T-33 type aircraft):
for mechanical calibration of target bearing and as
At 2000 ft, at least 20 naut mi
provided by video mapper.
At 6000 ft, at least 25 naut mi
At 10, 000 ft, at least 30 naut mi
AN/MPN-14: 2
Electrical News
Apollo 11 Inspired Generations of Innovators
Neil and Buzz were on the moon. Orbiting above, there...
eetimes.com
Smartwatches Suck, Says Pebble Backer
There are only two significant platforms in the smartwatch arena...
eetimes.com
Future Engineers: Don't 'Trip Up' on Your College Road Trip
A future engineering student gives his advice on making the...
eetimes.com
Future Engineers: Don't 'Trip Up' on Your College Road Trip
A future engineering student gives his advice on making the...
eetimes.com
DARPA's Chip Office Reboots to Tackle Cost & Complexity
DARPA's Microelectronics Technology Office, the source of much chip innovation...
eetimes.com
Mentor Launches Xpedition PCB Data Management Solution
The new Xpedition data management solution will ensure flow-wide PCB...
eetimes.com
Juggling a Cornucopia of Projects
Max is juggling so many hobby projects that it's no...
eetimes.com
Develop & Share Open-Source Hardware Projects
Matlab and Simulink are finding use in projects that don't...
eetimes.com
Android Open-Source for ARMv8-A Starts 64-Bit Avalanche
Mobile devices will need a big boost in processing power...
eetimes.com
Find an Entrepreneurial Mentor
As Luke had his Yoda, so does a startup CEO...
eetimes.com
Are We Ready to Give Up Driving?
In a Strategy Analytics survey, 40% of Americans said they...
eetimes.com
Broadcom Cuts 2,500 jobs
Broadcom announced plans to cut 2,500 jobs, 20% of its...
eetimes.com
AMS, Dialog Merger Talks Fail
Talks over a possible merger of mixed-signal chip companies AMS...
eetimes.com
The Risks & Rewards of Early Tapeout
Verification remains a key issue in system-on-chip development. The time...
eetimes.com
Nikola Tesla, Vincent Van Gogh & the Second Renaissance
Tesla was alive at the same time as Vincent! Both...
eetimes.com
Future of PCM: Optoelectronic?
Work by a team at the University of Oxford and...
eetimes.com
Mobile Uptick Ahead, Says ARM
Mobile device shipments are rebounding from a slump, but challenges...
eetimes.com
EEVblog #643 – Mailbag
Mailbag Monday Spoilers: Dual voltage source selection circuit Casio FX-7000G...
eevblog.com
Nvidia Raises Android Gaming Ante
The Nvidia Tegra K1 inside the Xaomi MiPad and now...
eetimes.com
Learn Signal Integrity Online
Signal-integrity evangelist Eric Bogatin's classes are now available through an...
eetimes.com

 


Privacy Statement - Copyright Information. - Contact Us

comments powered by Disqus

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +