RECEIVER-TRANSMITTER GROUP INSTALLATION.
Receiver-transmitter group weighs 580 pounds (263 kg). To prevent personal injury, do not attempt to lift
without necessary manpower or lifting device with suitable weight capacity.
On antenna pedestal, temporarily remove six screws (1), lockwashers (2), and flat washers (3) securing three
strap clamps (4).
Position receiver-transmitter group on center section of antenna pedestal and secure with six screws (1),
lockwashers (2), flat washers (3), and three strap clamps (4) removed in step 1.
Remove six fasteners (5), lockwashers (6), and flat washers (7) securing red vent cover (8) to bottom of receiver-
Remove vent cover (8) by sliding out through space between receiver-transmitter and receiver-transmitter frame.