ELEVATION ANTENNA DRIVE INSTALLATION.
MATERIALS/PARTS; Cloth sack marked ELEVATION ANTENNA DRIVE HARDWARE
Elevation antenna drive weighs 205 pounds (93 kg). To prevent personal injury, do not attempt to lift
without necessary manpower or lifting device with suitable weight capacity.
Position elevation antenna drive on top of receiver-transmitter and, using six screws (1), lock-washers (2), and
flat washers (3), secure.
Place elevation safety shield (4) on side of elevation antenna drive and, using four screws (5), lockwashers (6),
and flat washers (7), secure top end. Using two screws (8) and flat washers (9), secure bottom end.