TM 11-6625-1831-13
Section II.
DIRECT SUPPORT MAINTENANCE
5-4.
DISASSEMBLY
5-4a.
Test Set Disassembly
This task covers:
a.
Cover removal
b.
Test panel removal
INITIAL SETUP
Special Environmental Conditions
Tools
None
Electronic Equipment Tool Kit TK-105/G
General Safety Instructions
Screwdriver, No. 2 Phillips
Screwdriver, No. 1 Phillips, Offset
Make sure ac power is disconnected
Electronic Card Extractor
before disassembly
LOCATION/ITEM
ACTION
REMARKS
COVER REMOVAL
1. TEST SET CASE
a. Pressure Relief Valve
Press.
Makes air pressure equal
inside case
b. Eight cover latches
Pull down. Release from cover
c. Cover
Lift off
5-41
Previous Page
