(3) Recoverability code. Recoverability codes
h. Quantity Incorporated in Unit. Indicates the
quantity of the item used in the breakout shown
are assigned to support items to indicate the
on the illustration figure, which is prepared for a
disposition action on unserviceable items. The
functional group, subfunctional group, or an
recoverability code is entered in the fifth position
assembly. A "V" appearing in this column in lieu
of the Uniform SMR Code format as follows:
of a quantity indicates that no specific quantity is
applicable, (e.g., shims, spacers, etc).
4. Special Information
a. Usable on codes are shown in the description
condemn and dispose at the level indicated
column. Uncoded items are applicable to all
in position 3.
models. Identification of the usable on codes used
D-Reparable item. When beyond lower level
in this publication are:
repair capability, return to depot. Con-
demnation and disposal not authorized below
L-Reparable item. Repair, condemnation, and
disposal not authorized below depot/
b. The following publication pertains to the AM-
specialized repair activity level.
674/UPM and MX-9848/APR-39(V) 1 and their
A- Item requires special handling or condemnation
procedures because of specific reasons (i.e.,
(C)TM 11-6625-2742-14, Simulator, Radar Signal
precious metal content, high dollar value,
SM-674/UPM and Test Adapter, Radar Signal
critical material or hazardous material).
Refer to appropriate manuals/directives for
5. How to Locate Repair Parts
a. When National stock number or part number
c. National Stock Number. Indicates the
National stock number assigned to the item and
(1) First. Using the table of contents,
will be used for requisitioning purposes.
determine the functional group within which the
d. Part Number. Indicates the primary number
item belongs. This is necessary since illustrations
used by the manufacturer (individual, company,
are prepared for functional groups and listings are
firm, corporation, or Government activity), which
divided into the same groups.
controls the design and characteristics of the item
(2) Second. Find the illustration covering the
b y means of its engineering drawings,
functional group to which the item belongs.
standards, and inspection
(3) Third. Identify the item on the illustration
requirements to identify an item or range of items.
and note the illustration figure and item number of
When a stock numbered item is
(4) Fourth. Using the Repair Parts Listing,
requisitioned, the repair part received may
find the figure and item number noted on the
have a different part number than the part
b. When National stock number or part number
e. Federal Supply Code for Manufacturer
(FSCM). The FSCM is a 5-digit numeric code
(1) First. Using the Index of National Stock
listed in SB 708-42 which is used to identify the
Numbers and Part Numbers, find the pertinent
manufacturer, distributor, or Government agency,
National stock number or part number. This index
is in NIIN sequence followed by a list of part
f. Description. Indicates the Federal item name
numbers in alphameric sequence, cross-referenced
and, if required, a minimum description to identify
to the illustration figure number and item number.
(2) Second. After finding the figure and item
g. Unit of Measure (U/M). Indicates the
number, locate the figure and item number in the
standard of the basic quantity of the listed item as
repair parts list. -
used in performing the actual maintenance func-
tion. This measure is expressed by a two-character
alphabetical abbreviation (e.g., ea, in, pr, etc).
When the unit of measure differs from the unit of
issue, the lowest unit of issue that will satisfy the
required units of measure will be requisitioned.
(Next printed page is 4)