TB 11-5840-384-20
Transmitter Assembly
1. Loosen 6 captive screws and drop panel down.
2. Remove 4 boards a carefully disconnect wire leads.
3. Brush and blow out compartment, and boards.
4. Remove filter on bottom wash, let dry and reinstall.
5. Reinstall boards and close unit
13. Points of Contact.
a.
Point of contact for this action is ATSCOM, ATTN:AFATS-S4-MR DSN 558-3494 or Commercial 334-
255-3494
b.
Technical point of contact is ATSCOM, ATTN:AFATS-S4-MR DSN 558-3494 or Commerical 334-
255-3494
15. Reporting of Errors and Recommending Improvements.
You can help improve this publication. If you find any mistakes or if you know of a way to improve the
procedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to
Publications and Blank Forms) directly to : Commander, U.S. Army Aviation Systems Command,
ATTN: A reply will be furnished to you.
1-5
Previous Page
