MIL-HDBK-162A
Volume 1
15 December 1965
Section 1
TYPE: AN/GPA-101
Power Source: 105-130v, 52-67 cycles, single ph,
of the aircraft signals within the radar coverage area.
140 w
Duty Cycle: Continuous
RELATION TO SIMILAR EQUIPMENT
INSTALLATION CONSIDERATIONS
None.
Siting: Unit dimensions in cabinet - 11-5/8 in. high,
TECHNICAL DESCRIPTION
25-5/16 in. deep, 20-1/8 in. deep, 20-1/8 in.
wide, weight 76 lb.
Blanking of all pulses greater than: 0.7 usec, 1.0
Unit dimensions removed from cabinet - 8-1/4
usec, 2.0 usec, 3.0 usec and 4.0 usec (5
in. high, 19-1/2 in. deep, 16 in. wide, weight 52
position switch)
lb. Front Panel - 8-23/32 in. height, 19-1/2 in.
Repetition Frequency: Up to 2, 000 pps
wide.
Minimum Signal Input: 0.2v
Maximum Operating Height: 15, 000 ft
Mounting: Unit is supplied with four shockproof
Blanking: Two channels for MTI and
mounts on base of cabinet. Removed from the
Normal radar; blanking can be derived from either
cabinet the chassis may be bolted into a
video signal
standard relay rack.
Gain: Maximum gain 2-V2X; ea channel
independently controlled.
Related Equipments: Used with but not part of
Input Impedance: 100 ohms
Radar Set AN/CPN-18, Radar Set AN/CPN-4,
Output: Into 75 ohms load
Radar Set AN/MPN-11.
REFERENCE DATA AND LITERATURE
TECHNICAL ORDERS:
31P1-2GPA101 series
AN/GPA-101: 2
Previous Page
