MIL-HDBK- 162A
Volume 1
15 December 1965
Section 2
DATE: 1 July 1964
ITEM NAME: RADAR RECEIVER
COGNIZANT SERVICE: USN
TYPE: 46ACJ
FEDERAL STOCK NUMBER:
USA
USN
USAF
USMC
STATUS OR TYPE CLASSIFICATION
Mfg(s) Name or Code Number: Philco Corporation
mc, and again amplified and converted to a second if.
frequency of 16 mc. After a third application, the signal
is detected and applied as video pulses to a video
amplifier, which drives the cathode follower output stage
of the receiver. The output video pulses from the
receiver are fed through the Antenna Switching Unit,
which alternately transmits them to the horizontal
deflection plates of the CRT in an indicator unit where
they appear as target indications.
RELATION TO SIMILAR EQUIPMENT
None.
TECHNICAL DESCRIPTION
Frequency: 509 to 556 mc
IF. Frequencies: 55 to16 mc
FUNCTIONAL DESCRIPTION
Operating Voltages: 6.3v, 6. 6 amp, 1-ph, 600
to 2400 cps
The purpose of 46ACJ is to detect and amplify any
reflected signal which is received by the antennas
INSTALLATION CONSIDERATIONS
during the intervals between pulses from the ASB Radar
Transmitter. The signals are applied to the receiver
Not available.
through the Antenna Switching Unit. The reflected rf
pulses are amplified, converted to an if. frequency of 55
PRINCIPAL COMPONENTS AND PHYSICAL DATA
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
(Pounds)
Radar Receiver NT-46ACJ
1
6-1/8
5-7/8
15-11/16
10
REFERENCE DATA AND LITERATURE
Technical Manual:
NAVAER 08-5S-29
46ACJ: 1
Previous Page
