Volume 1
MIL-HDBK-162A
Section 3
15 December 1965
CV-95A/U
TECHNICAL DESCRIPTION
FUNCTIONAL DESCRIPTION
IF. Input: 15 mc
Frequency Converter CV-95A/U is designed to (1)
Impedance: 75 ohms
amplify the if. output of any radar or other system
Video Output: 1 to 3v
containing a 15-mc if. channel, (2) detect and amplify
Frequency Response: Flat within 1 db from 250 cps
any audio or video modulation from the associated radar
to 2.5 mc
or other 15-mc if. system, and (3) furnish a peak video
Sensitivity: A i-mv if. input at any of four input
output of two volts. The CV95A/U provides additional
channels provides five video outputs of 2v peak
video channels for equipments that do not have enough
into resistive loads of 75 ohms
video outputs or whose video outputs are too low. Each
Operating Voltages and Power Requirements: 100 to
CV-95A/U will combine one to four sets of 15-mc if.
130v, 58 to 62 cps, 1-ph, 95% lagging pf, 205w
range data and supply video range data to a maximum
of five PPI repeaters. More than one CV-95A/U may be
used with a single system.
INSTALLATION CONSIDERATIONS
RELATION TO SIMILAR EQUIPMENT
Siting:
Mounting:
Cabling Requirements:
The CV-95A/U and CV-95/U are electrically and
Related Equipment: Radar Console SR, Radar
mechanically interchangeable except for minor
Training Equipment OCZ, OCZ-1, and PPI
modifications.
Repeater VG.
PRINCIPAL COMPONENTS AND PHYSICAL DATA
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
(Pounds)
Frequency Converter CV-95A/U
1
10-1/4
12-3/4
20-5/8
43
Coaxial Connector NT-49190
9
Power Connector NT-49639
1
REFERENCE DATA AND LITERATURE
Technical Manual:
NAVSHIPS 92068
CV-93A/U: 2
Previous Page
