Volume 1
MIL-HDBK-162A
Section 3
15 December 1965
TYPE: 0-329/SP
Data on this sheet reflects the following field changes,
Peak Voltage: 50 to plus or minus 10% nom
FC-1.
across a 75 ohm plus or minus 5% terminating
resistor.
Duration: 10 usec max at 85% nom peak voltage.
RELATION TO SIMILAR EQUIPMENT
Rise Time: Within 20% of nom pulse duration, but
no less than 40v per usec.
None.
Overshoot (Positive and Negative): 10% max of
nom peak voltage.
TECHNICAL DESCRIPTION
Heat Dissipation: 88w
Power Requirements: 115v plus or minus 10%, 60
Pulse Rate
cps plus or minus 2 cps
Band 1: 120 to 500 pps
Rectification: Full-wave type (power supply).
Band 2: 500 to 1000 pps
Pre-Trigger Pulse Data
INSTALLATION CONSIDERATIONS
Adjustment: 50 usec plus or minus 10% ahead of
radar trigger (before shipment).
Related Equipment:
Polarity: positive
Required but not Supplied. (1) Radar Set; (6)
Peak Voltage: 20 to 50v nom across a 75 ohm
Connector, Cable; Cable, Coaxial RG-12/U as
plus or minus 5% terminating resistor.
Required; Cable, Armored RSGA-3 as
Rise Time: 9.93 to 25 usec at 50% amplitude.
Required.
Radar Trigger Pulse Data
Polarity: positive
PRINCIPAL COMPONENTS AND PHYSICAL DATA
SHIPPING DATA
COMPONENT
BOXES
OVERALL DIMENSIONS
UNIT WT.
(NR.)
(Inches)
(Pounds)
Pulse Trigger Generator 0-329/SP
1
22-3/4 x 22-3/4 x 28-5/8
98
including:
(2) Technical Manuals NAVSHIPS 92567
Equipment Spares
*Field Change Kit Parts
*Field Change Bulletins
*Temporary Corrections
NOTE: *Omitted when Pulse Trigger Generator 0-329/SP is not a part of Field Change Kit.
0-329/SP: 2
Previous Page
