Volume 1
MIL-HDBK-162A
Section 3
15 December 1965
ITEM NAME: RADAR EQUIPMENT
TYPE: SV, SV-1
Range
RELATION TO SIMILAR EQUIPMENT
SV: 5 in. "A" scope, 10 and 30 mi
The Models SV and SV-1 replace Radar Equipment
ranges and 1.5 mi precision sweep.
SD. The SV-1 is similar to the SV but has instantaneous
SV-1: 3 in. "A" scope, 4, 20 and 80
automatic volume control, a fast time constant, and uses
mi ranges and 2.0 mi precision sweep.
the indicating unit of Radar Equipment SS with provision
Accuracy: plus or minus (25 yd plus
for true bearings; the SV uses the Radar Equipment SJ-1
0.1% of measured range) to 30 mi and
indicator.
plus or minus (200 yd plus 2% of
measured range) to 80 mi.
TECHNICAL DESCRIPTION
Bearing
General
SV-1: 3 in. "B" scope, 2 mi precision
Maximum Reliable Range
sweep.
Bombers at 2500 to 15, 000 Ft: 22 mi
Accuracy: Plus or minus 0.5 deg
Bombers at 300 Ft: 15 mi
PPI
Fighters at 10, 000 Ft: 11 mi
Type: 5 in. CR tube, provision for
Fighters at 200 Ft: 14 mi
four repeaters.
Minimum Range: 400 yd
Ranges: SV; 4, 10, 20, and 80 mi.
Resolution
SV-1; 4, 10, 20, and 80 mi. Both with
Range. 5.7 yd
4 mi precision sweep.
Bearing: 5 deg
Markers: Range in electrical line;
Accuracy
bearing, mechanical cursor.
Range: SV, plus or minus (50 yd to
Scales: Relative bearing scale ring
0.1%); SV-1, 15 yd plus or minus 1%.
(SV, SV-1); true bearing scale ring
Bearing: SV, plus or minus 2 deg; SV-1,
(SV-1).
0.5 deg
Other: Provision of IFF trigger and
Power Source Required: 115v, 60 cps, 1-ph,
display.
6 kva.
Feed: Waveguide
Frequency Range: 3400 to 3700 mc
Reflector: 2 by 4 ft slotted parabola.
RF Source: Magnetron
H.P. Beamwidth
RF Lines: Waveguide.
Horizontal: 5.5 deg
RF Peak Power: 500 kw
Vertical: 60 deg
RF Average Power: 0.2 kw
Polarization: Horizontal
Pulse Rate: 400 pps plus or minus 5%.
Gain: 30 db
Pulse Width: 1.0 usec
Scan: 3600 at 0 to 6 rpm by motor.
Receiver
INSTALLATION CONSIDERATIONS
Type: Superheterodyne, double detector.
Related Equipment:
IF: 60 mc
Required but not Supplied.
Bandwidth: 2 mc IF, 3 mc video.
Interconnecting Cables and straight
Frequency Control: Manual or automatic.
sections of waveguide.
Indication Data
PRINCIPAL COMPONENTS AND PHYSICAL DATA
SHIPPING DATA
COMPONENT
BOXES
OVERALL DIMENSIONS
UNIT WT.
(NR.)
(Inches)
(Pounds)
Indicator Console 55AHN**
1
23 x 47 x 62
1200
Torque Tube Drive Unit 10AFB
1
24 x 27 x 28
550
Spline Shaft Drive Unit 10AFC
1
18 x 22 x 26
280
Spline Shaft Upper Bearing 10AFE
Synchro Unit 21ADE-SV or -21ADF-SV-1
Motor Drive Shaft
1
4 x 5 x 68
30
Power Distribution Unit 23AGS**
1
15 x 27 x 28
175
Junction Box 62217**
1
8 x 20 x 22
100
SV: 2
Previous Page
