TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-38. REPLACEMENT OF RADAR SIGNAL INDICATOR POWER SUPPLY.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Radar signal indicator cover off
Tool Kit, Electronic Equipment TK-105/G
and electrical connector removed.
Materials/Parts
See paragraphs 2-31 and 2-34.
Power supply assembly, SMD877090
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
1. Power supply
Unscrew cap and remove cable.
Cap (1) and,
high voltage
cable (2)
Using cross-tip screwdriver, remove.
2.
Screws (3) and
flat washers (4)
Tag, unsolder.
Leads (5), (6)
3.
and (7)
Remove.
Power supply (8)
A . Chassis assembly
Pull straight back to remove the
power supply from the CRT pins.
INSTALLATION
Install.
1 . Chassis assembly
Power supply (8)
Solder. Remove tags.
Leads (7), (6)
2.
and (5)
Flat washers (4)
Using cross-tip screwdriver, install.
3. Power supply
and screws (3)
2-88
Previous Page
