TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2.52. REPAIR OF COMPARATOR WIRE HARNESS. (CONTj
ACTION
LOCATION
ITEM
REMARKS
5. Wire harness
New lead (5) and
Install.
new tie-down
Repeat steps 4 and 6 along wire
strap (6)
harness until old lead is removed and
new lead is installed.
NOTE
Before performing the following step, be sure the soldering
iron is clean.
6 . Electrical
Pin (7) and
Using soldering iron and aid, heat pin and
connector
lead (3)
remove lead.
7.
New lead (5) and
Using soldering iron and aid, heat pin
pin (7)
and install new lead.
EL1BF082
2-119
Previous Page
