TM 11-5841-291-20P
(3) Recoverability code.
h. Quantity Incorporated in Unit. Indicates the
Recoverability
codes are assigned to support items to indicate the
quantity of the item used in the breakout shown on the
disposition action on unserviceable items.
The
illustration figure, which is prepared for a functional
recoverability code is entered in the fifth position of the
group, subfunctional group, or an assembly.
Uniform SMR Code as format as follows:
4.
Special Information
Recoverability
codes
Definition
a. Usable on codes are show in the
Z - Nonreparable item.
When unserviceable,
description column. Uncoded items are applicable to all
condemn and dispose at the level indicated in
models. Identification of the usable on codes used in
position 3.
this publication are:
D Reparable item. When beyond lower level repair
capability, return to depot. Condemnation and
Code
Used on
disposal not authorized below depot level.
DXX
AN/APR-44(V)1
L Reparable item. Repair, condemnation, and
EVC
AN/APR-44(V)3
disposal not authorized below depot/spec-
ialized repair activity level.
b. The following publications pertain to the
AN/APR-44(V)1 and AN/APR(V)3 and their components:
c. National Stock Number.
Indicates the
National stock number assigned to the item and will be
TM 11-5841-291-12, Radar Warning Set, AN/APR-
used for requisitioning purposes.
44(V)1.
d. Federal Supply Code for Manufacturer
c. National stock numbers (NSN's) that are
(FSCM). The FSCM is a 5-digit numeric code listed in
missing from P source coded items have been applied
SB 708-41/42 which is used to identify the manufacturer,
for and will be added to this TM by future change/revision
distributor, or Government agency, etc.
when they are entered in the Army Master Data File
(AMDF). Until the NSN's are established and published,
e. Part Number. Indicates the primary number
submit exception requisitions to: Commander, US Army
used by the manufacturer (individual, company, firm,
Communications-Electronics Command and
Fort
corporation, or Government activity), which controls the
Monmouth, ATTN: DRSEL-MM, Fort Monmouth, New
design and characteristics of the item by means of its
Jersey 07703 for the part required to support your
engineering drawings, specifications, standards, and
equipment.
inspection requirements to identify an item or range of
items.
5.
How to Locate Repair Parts
NOTE
a. When National stock number or part
number is unknown.
When a stock numbered item is
(1) First. Using the table of contents,
requisitioned, the repair part received
determine the functional group within which the item
may have a different part number
belongs.
This is necessary since illustrations are
than the part being replaced.
prepared for functional groups and listings are divided
into the same groups.
f.
Description. Indicates the Federal item
(2) Second. Find the illustration covering
name and, if required, a minimum description to identify
the functional group to which the item belongs.
the item.
(3) Third.
Identify the item on the
illustration and note the illustration figure and item
g. Unit of Measure (U/M).
Indicates the
number of the item.
standard of the basic quantity of the listed item as used
(4) Fourth. Using the Repair Parts Listing,
in performing the actual maintenance function. This
find the figure and item number noted on the illustration.
measure is expressed by a two-character alphabetical
abbreviation (e.g., ea, in pr, etc). When the unit of
b. When National stock number of part
measure differs from the unit of issue, the lowest unit of
number is known.
issue that will satisfy the required units of measure will
be requisitioned.
2
Previous Page
