TM 11-6625-1831-13
5-2a. Visual Inspection and Physical Test (Cont)
LOCATION/ITEM
ACTION
REMARKS
VISUAL INSPECTION
1. TEST PANEL
a. All assemblies
Check for loose or missing screws,
Malfunction 1
bolts, or nuts.
b. Electrical connectors,
Check for looseness, damage,
Malfunction 2
plugs, jacks, switches
missing covers.
2. BREAKOUT BOX
a. Controls, cover
Check for loose or missing screws,
Malfunction 3
loose controls.
b. Electrical cable, plug
Check for damage, cracks, loose-
Malfunction 4
ness.
3. TEST SET CASE
Exterior
Check for damage, loose or
Malfunction 5
missing parts.
4. EXTENDER CARDS
Entire card
Check for damage
Malfunction 6
5. ALL CABLES (14)
Cable and connectors
Check for damage
Malfunction 7
PHYSICAL TEST
6. TEST PANEL
a. LEVEL 1, CORNER, PRF,
Check for smooth operation in
Malfunction 8
MULT, OSC, MT GEN,
each direction.
PWR, toggle switches.
b. DATA MARK, BITE
Check for smooth operation and
Malfunction 8
TEST, PANEL LIGHTS
automatic return to OFF position.
TEST, PUSH TO RESET
spring-loaded
switches
c. All rotary switches and
Check for smooth operation to
Malfunction 8
potentiometers.
all positions.
7. BREAKOUT BOX
DDL-PROC switch
Check for smooth operation in
Malfunction 9
each direction.
END OF TEST
5-3
Previous Page
