TM 11-6625-1831-13
5-6. ELECTRICAL TEST PANEL REPAIR
Repairs on Electrical Test Panel at Direct Support level are limited to the following:
1.
Replace modules 1Al, 1A2, 1A3, 1A6.
2.
Repair or replace module 1TB1.
3.
Replace chassis-mounted components.
4.
Repair wiring
5.
Replace entire test panel.
NOTE
Refer to paragraphs 5-4 and 5-11 for disassembly and reassembly instructions. Always tag all wires
before unsoldering them. Be careful when soldering wires to switch terminals. Terminals are easily
broken.
5-48
Previous Page
