RADAR TEST SET
EQUIPMENT DESCRIPTION AND DATA - Continued
Any attempt to charge other than the battery sticks supplied or commercial
NI-CAD or NiMH C-size rechargeable batteries could result in battery
EXPLOSION and causing INJURY or DEATH. Alkaline batteries must be
removed from the Test Set before operation from external power. The Test
Set will attempt to recharge any installed batteries when connected to an
Battery Stick - The battery stick is the 7.2 V dc power source for the Test Set. It consists of six high
capacity, rapid charge, NI-CAD, C-size battery cells. The six battery cells are welded together to form a
single battery stick 11.8 inches long. A spare battery stick is supplied.
RS-232 Cable - The 9-pin RS-232 cable is used in conjunction with the KIT/KIR interface cable to
connect the TS-4530/UPM to a personal computer when running the Bench Utility software. The PC is
not provided with the TS-4530/UPM kit.
CD-ROM, Operator Training Software - A CD-ROM supplied with the test kit contains the interactive
Operator Training Software. This software allows the user to simulate Test Set operation on a PC.
CD-ROM, Bench Utility Software - A CD-ROM supplied with the test kit contains the Bench Utility
software. This software allows the user to download test data from the TS-4530/UPM and to update
direct connect cable loss factors.
Manual, TS-4530/UPM Operation and Maintenance - This manual provides operation and field-level
maintenance information for the TS-4530/UPM.
RF Adapter Used to convert from a type "N" jack to a type "TNC" plug. May be used with a direct
connect cable to adapt the connection to the antenna connector on a transponder or interrogator under
Power Cord Used with AC adapter.
SPECIFICATIONS AND CHARACTERISTICS
(Test Set without accessories)
14.1 inches / 358 mm
7.5 inches / 190 mm
11.5 inches / 292 mm
<11 lbs. / 4.99 kg (with battery)
MIL-PRF-28800F CLASS 1
-40 C to +55 C operating, -55 C to + 85 C storage.
To 100%, Rain Exposure Acceptable
Less than 15,000 feet (4572 m) operating, 50,000 feet (15,240 m)
30 g sine 11 ms
Random vibration 6.3 g 10-1000 Hz
The Test Set, cables, and transit case withstand salt exposure 48
hours in 5% salt atmosphere at 35C without corrosion.
All components are fungus resistant.
EMI / RFI:
Power Leads, 30 Hz to 10 kHz