other than (3) (h), (i), and (j) above listed
Parts: defects as listed in MIL-
7.
under major defects omitted, incorrect, or
STD-252A.
illegible.
8. Contacts: defects as listed in MIL-
STD-252A.
(5) Packing and marking - major.
(a) Use of improper or defective ma-
(2 ) Electrical.
terial.
( a ) C r i t i c a l Refer to the definition of
(b) Quantity in pack not as specified.
a critical defect.
(c) Gross weight in excess of specified
(6) Major. Any electrical defect, other
amount.
than critical, that does not meet the require-
ments specified for each item shall be con-
(d) Box closure not as specified.
sidered a major defect.
(e) Type, grade, class, and style of
(c) Minor. None. All electrical defects
the shipping container not as specified.
shall be considered critical or major, as ap-
(f) Strapping omitted (when required).
plicable.
(g) Strapping inadequate or incorrectly
(3) Packaging and marking - major.
applied (when required).
(a) Use of improper or defective ma-
(h) Items not adequately blocked,
terial.
braced, or cushioned within the shipping con-
(6) Quantity in unit package not as
tainer to prevent movement or damage.
specified.
(i) Shipping documents or packing list
(c) Incorrect packaging method ap
omitted.
plied.
(j) Stock number omitted, incorrect, or
(d) Cushioning or padding omitted.
illegible.
(e) Cushioning or padding inadequate
(k) Nomenclature omitted, incorrect, or
for the protection of the barrier material from
illegible.
projections, sharp edges, or other similar fea-
(I) Marking of quantities of items in
tures of the item.
pack omitted, incorrect, or illegible.
(f) Cushioning inadequate for the phys-
(m) Destination marking omitted, in-
ical and mechanical protection of the item.
correct, or illegible.
(g) Unsealed, punctured, or improperly
(n) Special marking or labeling (when
sealed barrier bag, wrap, or envelope.
required) omitted, incorrect, or illegible.
(h) Stock number omitted, incorrect,
(o) Overseas code marking (when re-
or illegible.
quired) Omitted, incorrect, or illegible.
(i) Nomenclature omitted, incorrect, or
illegible.
(6) Pawing and marking - minor.
(a) Unsealed carton.
(j) Marking of quantity of items in pack-
age omitted, incorrect, or illegible.
(b) Defective taping or sealing of car-
ton.
(k) Different stock numbered items in
the same unit package.
(c) Any other box defect which may
be considered minor by definition of MIL-
(4) Packaging and marking - minor.
STD-105D.
(a) I tern not properly blocked or braced
(d) Any item of required marking in-
within the unit package to prevent movement.
formation other than (5) (j) through (o) above
(6) Packaging material damaged.
listed under major defects omitted, incorrect,
or illegible.
(c) Conforming or cushioning wraps are
not snug fitting and contain voids.
of Measuringand Test Equip-
f. Calibration
(d) Air not expelled from barrier prior
ment. All measuring and test equipment shall
to sealing.
have been calibrated and certified within its
(e) Any item of marking information
p r e s c r i b e d period, in accordance with
Previous Page
