Volume 1
MIL-HDBK-162A
Section 3
15 December 1965
ITEM NAME: RADAR SET
TYPE: AN/SPS-35, AN/SPS-35A
not less than 6 from mechanical horizon.
RELATION TO SIMILAR EQUIPMENT
Rotation: 20 rpm (avg).
The AN/SPS-35A is a modified AN/SPS-35 with an
Radar Resolution
additional PPI (remote) and minor changes. AN/SPS-35 and
Azimuth: 2.5
AN/SPS-35A are similar to, but not mechanically
Range: 50 yds
interchangeable with AN/SPN-21 and AN/SPS-36.
The
antenna and indicator units also have some component part
Power Requirements
differences. AN/SPS-35, -35A are modified military versions
Standby: 207w
of the Raytheon Pathfinder, Raytheon Model 1500.
Radiate: 565w at 5.41 amp
Voltage Requirements:
TECHNICAL DESCRIPTION
PU-420/U
PU-421/U)
115v ac, 60 cycles, 1-ph
Peak Power Output: 7 kw
Pulse Length: 0.2 usec
INSTALLATION CONSIDERATIONS
Pulse Repetition Frequency
1500 pps for 1, 2, 4, 8, and 16 mi ranges
750 pps for 32 mi range
mounting in the antenna housing. The Indicator
Type of Receiver: Superheterodyne
is drip-proof but must be sheltered from the
IF. Frequency: 45 mc
weather.
Control-Indicator is designed for
3position mounting.
Antenna is sideclamp
Antenna: Truncated paraboloidal reflector
instead of usual base or pedestal bolt mounting.
Horizontal Beam Width: 3
Vertical Beam Width: 15 with 3 db point
PRINCIPAL COMPONENTS AND PHYSICAL DATA
SHIPPING DATA
COMPONENT
BOXES
OVERALL DIMENSIONS
UNIT WT.
(NR)
(Inches)
(Pounds)
1
32 x 50 x 56
274
AS-923/SPS-35
Control Indicator C-2335/SPS-35
1
28 x 33 x 44
294
Cathode Ray Tube10WP7
1
17 x 19 x 29
54
IKEE
1
18 x 18 x 29
45
Equipment Maintenance Parts
1
14 x 21 x 26
62
Equipment Maintenance Parts
1
14 x 21 x 24
54
Equipment Maintenance Parts
1
14 x 21 x 24
61
Equipment Maintenance Parts
1
19 x 21 x 33
51
Compensator, Power Factor CN-469/U
*Motor-Generator PU-420/U
**Motor-Generator PU-421/U
ANSPS-35: 2