Volume 1
MIL-HDBK- 162A
Section 3
15 December 1965
AN/UPX-5, -5A, -5B
FUNCTIONAL DESCRIPTION
Radar Identification Sets AN/UPX-5, -5A, and -5B
Duty Cycle: 0.1% while carrying rf pulses of
respond to interrogations from radar recognition sets for
10-kw peak power
the purpose of self-identification. They receive paired-
Minimum Output: 300 watts at 500 pps
pulse interrogation signals and transmit single-pulse
Pulse Width: 0.9 to 1.3 sec at 50% peak am-
identifying replies. Interrogations are pulse-pairs in one
plitude
or more of three modes as determined by the spacing of
Operating Voltages and Power Requirements:
the pulses in a pair. Replies to all modes are single,
105 to 125v, 57 to 63 cps, or 360 to 440 cps,
one-microsecond pulses.
1-ph, 398w approx
RELATION TO SIMILAR EQUIPMENT
INSTALLATION CONSIDERATIONS
When changes as directed by NAVSHIPS 98825
have been performed, these equipments become
Siting:
Transponder Sets AN/UPX-12, AN/UPX-12A, and
Mounting:
AN/UPX-12B, respectively.
Cabling Requirements: Cables must enter the
cases without excessive sharp bends. Inter-
connecting cables between receiver-trans-
TECHNICAL DESCRIPTION
mitter and decoder must not exceed 20 feet.
The antenna cable must not exceed 150 feet,
and other cables should not exceed 300 feet
transmitter, 1090 to 1110 mc
in length.
Related Equipment:
PRINCIPAL COMPONENTS AND PHYSICAL DATE
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
(Pounds)
AN/UPX- 5
Receiver-Transmitter
1
15-1/2
18
28-3/8
141
RT-269/UPX- 5
Decoder KY-88/UPX-5
1
10
18
26-5/8
101
Radar Set Control C-1076/UPX-5
1
8
3-1/2
5-5/16
3
AN/UPX-5A
RT-269A/UPX-5
Decoder KY-88A/UPX-5
1
10
18
26-5/8
101
Radar Set Control C-1076A/UPX-5
1
8
3-1/2
5-5/16
3
AN/UPX- SB
RT-269B UPX-5
Decoder KY-88B UPX-5
1
10
18
26-5/8
101
Radar Set ControlC-1076B, UPX-5
1
8
3-1/'2
5-5 16
3
REFERENCE DATA AND LITERATURE
Technical Manual:
NAVSHIPS 91836(A)
AN/UPX-5: 2)