TM 11-5840-281-12-1
4-51.
DISASSEMBLY. (CONT)
INTERCONNECTING CABLE DISCONNECTION (CONT)
8.
Using rope or heavy twine, secure loose end of cables to cable reels to prevent cables from unraveling.
9.
Batten cable reels.
CONTROL-INDICATOR DISASSEMBLY
NOTE
Perform the following disassembly procedures for both control-indicators.
1.
Unlatch five link locks (1) on front of control-indicator and remove indicator rain shield (2).
2.
Install front cover (3) on control-indicator and secure with five link locks (1).
3.
Remove six screws (4) and lockwashers (5) securing indicator rain deflector (6) and remove Indicator rain deflector.
4.
Install cover plate (7) over rear exhaust vent and secure with six screws (4) and
5.
Locate indicator rain shield (2) and indicator rain deflector (6) near shipping drum no. 6.
RADAR SET GROUP DISASSEMBLY
Shipping drums no. 5 and no. 6 are packed during radar set group disassembly. Shipping frames no. 1 and no. 2 are
packed after radar set group has been completely disassembled and shipping drums have been packed.
4-156
Previous Page
