TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-42. REPLACEMENT OF RADAR SIGNAL INDICATOR YOKE.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Radar signal indicator CRT removed.
See paragraph 2-40.
Materials/Parts
Yoke, C9740-1
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
1 . Yoke
Leads (1)
Tag leads. Using soldering iron and aid,
unsolder.
Using flat-tip screwdriver, loosen.
Screw (2)
2. Yoke clamp
Loosen screw in clamp so that
yoke can be removed.
Yoke (3)
Remove.
3.
Carefully push out of clamp to front
of indicator.
INSTALLATION
1. Yoke clamp
Install.
Yoke (3)
Carefully push into clamp from front
of indicator.
2.
Using flat-tip screwdriver, tighten.
Screw (2)
Leads (1)
3. Yoke
tags.
2-96
Previous Page
