TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-44. ALINEMENT OF RADAR SIGNAL INDICATOR STROBE.
This task covers:
Alinement
INITIAL SETUP
Tools
Personnel Required
Two technicians
Tool Kit, Electronic Equipment TK-105/G
Equipment Condition
Materials/Parts
Radar signal indicator cover off
Magnet, permanent, 11-00002
(see paragraph 2-31) and indicator
mounted on test adapter.
ACTION
REMARKS
ITEM
LOCATION
1 . Control unit
Set to OFF.
PWR ON-OFF
switch (1)
Yoke clamp
Using flat-tip screwdriver, loosen.
2. Radar signal
indicator
screw (2)
WARNING
Dangerous voltages are present in the radar signal indicator
when power is applied. Be careful when adjusting the
yoke.
PWR ON-OFF
Set to ON.
3 . Control unit
switch (1)
Set to OFF.
DSCRM ON-OFF
4.
switch (3)
Press and hold.
SELF TEST
5.
switch (4)
Rotate yoke slightly to make strobe vertical
Yoke (5), CRT
6. Radar signal
on CRT screen.
indicator
screen (6) and
Hold yoke firmly against CRT bell
CRT bell (7)
while rotating.
2-100
Previous Page
