TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-47. REPLACEMENT OF COMPARATOR BAND PASS FILTER.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Card extractor
Comparator cover off (see
A2 through A11 removed (see
Materials/Parts
Filter, band pass, BC126
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Using cross-tip screwdriver, remove.
1. Circuit card
Screws (1)
connector board
NOTE
Reposition circuit card connector board so that the following
step can be performed.
Using 3/8-inch wrench, remove.
2.
Coaxial connector
hex nut (2)
Using cross-tip screwdriver, remove.
Screws (3) and
3.
Iockwashers (4)
Remove filter from clip.
Clip (5) and
4.
band pass
filter (6)
INSTALLATION
1 . Comparator
Install filter in clip.
Band pass
filter (6)
and clip (5)
2-108
Previous Page
