TM 11-5641-263-34-1/NAVAIR 16-30APR39-2
2-48. REPLACEMENT OF COMPARATOR DETECTOR
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Comparator cover off (see
Card extractor
A2 through A11 removed (see
Materials/Parts
Detector, limiter, MA7715A0104
ACTION
ITEM
LOCATION
REMARKS
REMOVAL
1. Circuit card
Screws (1)
Using cross-tip screwdriver, remove.
connector board
NOTE
Reposition circuit card connector board so that the following
step can be performed.
2 . Detector
Coaxial
Using 3/8-inch wrench, remove.
connectors (2)
3 . Comparator
Clip (3) and
Remove detector from clip.
detector (4)
INSTALLATION
1 . Comparator
Detector (4)
install detector in clip.
and clip (3)
2 . Detector
Coaxial
Using torque wrench, tighten to 7 inch
connectors (2)
pounds.
3 . CompWator
Screws (1)
Using cross-tip screwdriver, install.
2-110
Previous Page
