TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-57. REPLACEMENT OF RECEIVER CIRCUIT CARD CONNECTOR BOARD.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Equipment Condition
Tools
Receiver covers off (see
Tool Kit, Electronic Equipment TK-105/G
Card extractor
and circuit cards removed
Materials/Parts
(see paragraph 2-46).
Circuit card assembly, connector
board, SMC877025
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
1. Filter assemblies
Terminals (1)
and leads (2)
Using cross-tip screwdriver, remove.
2. Circuit card
Screws (3)
connector board
Hex nuts (4) and
Using 3/8-inch wrench, remove.
3 . Detector
coaxial cables (5)
Using cross-tip screwdriver, remove.
4 . Receiver
Screws (6) and
Remove board.
board (7)
INSTALLATION
Using cross-tip screwdriver, install.
1 . Receiver
Board (7)
and screws (6)
Using 3/8-inch wrench, install.
Coaxial cables (5)
2 . Detector
and hex nuts (4)
2-126
Previous Page
