TM 11-5641-283-34-1/NAVAIR 16-30APR39-2
2-59. REPLACEMENT OF RECEIVER HIGH PASS FILTER.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Receiver bottom cover off.
Tool Kit, Electronic Equipment TK-105/G
See paragraph 2-54.
Materials/Parts
High pass filter, dual
channel
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
1. Receiver bottom
Using 3/8-inch wrench, remove.
Coupling nuts (1)
and detectors (2)
Using cross-tip screwdriver, remove.
2.
Mounting screws
(3) and high pass
filter (4)
INSTALLATION
1. Receiver bottom
High pass filter
Using cross-tip screwdriver, install.
(4) and mounting
screws (3)
2.
Detectors (2) and
Using 3/8-inch wrench, install.
coupling nuts (1)
NOTE
See paragraph 2-54 for installation of bottom cover.
2-130
Previous Page
