TB 11-5840-384-20
1. Purpose. Provide a cleaning requirement to remove salt / salt laden sand and other corrosive contaminates
from ATNAVICS returning from OCONUS Desert Operations. Environmental conditions within the Southwest
Asia (SWA) theater of operations were conducive to the introduction of salt laden sand and other corrosive
substances into the interior surfaces of the ATNAVICS. These substances, if allowed to remain, will
accelerate the corrosion process and lead to premature corrosion damage. Immediate removal of these
Substances is imperative in order to minimize future corrosion damage. This Technical Bulletin (TB) is
issued to provide special inspection and cleaning procedures for all deployed/redeployed ATNAVICS.
2. Priority Classification. NORMAL.
ATNAVICS will complete cleaning procedures as necessary but as a minimum at next PMCS.
b. Equipment in Storage. No later than 30 clays after redeployment from Desert Operations. Equipment
deployed will complete cleaning procedures as necessary but as a minimum quarterly.
3. End Items to be Inspected. All ATNAVICS after redeployment from Desert operations. Deployed ATNAVICS
will complete requirements as necessary but at a minimum at next PMCS.
4. Assembly Components to be Inspected. Not applicable
5. Parts to be inspected. Not applicable.
6. Application.
a. Category of Maintenance - Organizational/Direct Support (UNIT Level).
b. Time Required. As required to comply with this TB.
c.
Estimated Cost Impact of Stock Fund Items to the Field. Not applicable.
d. TB / MWOs applied prior to or concurrently with this inspection. Not applicable.
e. Publications which require change as a result of this inspection. Not applicable.
7. Supply / Parts and Disposition.
a. Parts Required. Not applicable.
b. Requisitioning Instructions. Requisition materials through normal supply channels using normal supply
procedures. Requests should be the highest priority authorized by Force Activity Designator (FAD). If the
delivery is forecasted to be in excess of 21 days; or if materials are not received within 21 days of
ordering contact your local GSA Customer Service Center as appropriate to specific item of concern. If
unable to requisition items within the allotted time frame contact one of the POCs listed in this TB.Bulk
and Consumable Materials.
c.
Bulk and Consumable Materials.
NOMENCLATURE
PART NO/NSN
U/I
QUANTITY REQ
Cloth, cheesecloth, lint-free
YD
Phosphate-free detergent
EA
Previous Page
