Volume 1
MlL-HDBK- 162A
Section 1
15 December 1965
ITEM NAME: RADAR RECOGNITION SET
TYPE: AN/UPX-6
(adjusted to conform with prr of
RELATION TO SIMILAR EQUIPMENT
associated radar)
Receiver Bandwidth:
Similar to Interrogator Set AN/IIPX-2 without coder
Broad - 8 to 11 mc - 60 db
and has power input of 60 and 100 cycles instead of
Narrow - 5 mc - 70 db
.100 and 800 cycles; similar to Radar Recognition Set
Receiver Input Impedance: 5() ohms
AN/I'PX-6X except blower operates on 60 cycles only.
Receiver Output Impedance: 72 ohms
Frequency (if.): 60 mc
TECHNICAL. DESCRIPTION
INSTALLATION CONSIDERATIONS
Siting: This equipment is located with
Transmitter - 990-10-10 mc
the associated radar.
Receiver - 1080-1130 mc
Peak Power Output: 1.5 kw
Mounting: AN/UPX-6 is installed with
Operating Voltages and Power Requirements:
the basic radar.
105, 117 or 125v ac, 60 or 100 cps,
single ph, 250 w
Related Equipments: Radar Recognition
Type of Presentation: PPI and B indicators
Set AN/UPX-6 is used with Identifica-
of associated radar set
tion Sets AN/GPX-9, AN/GPX-17,
Pulse Width: I use<
AN/GPX-18, AN/GPX-20, AN/MPX-7.
Pulse Repetition Rate: 180 to 120 pps
PRINCIPAL COMPONENTS AND PHYSICAL DATA
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
Radar Recognition Set AN/UPX-6
1
11
15
21
77
REFERENCE DATA AND LITERATURE
TECHNICAL ORDERS:
31P4-2UPX6- Series
AN/UPX-6: 2
Previous Page
