Volume 1
MIL-HDBK- 162A
Section 1
15 December 1965
ITEM NAME: RADAR SET
TYPE: AN/UPX-7
3 usec apart in Mode 1
RELATION TO SIMILAR EQUIPMENT
5 usec apart in Mode 2
8 usec apart in Mode 3
The AN/UPX-7A is the same as the AN/UPX-7
Power Output: 21 to 30 db above one watt
except includes Indicator ID-169/ADN-12, or equivalent.
into 51-ohm essentially resistive load.
TECHNICAL DESCRIPTION
Receiver Triggering Sensitivity Level:
81 to 88 db below one volt.
Frequency Range: 950 to 1150 mc in 12
channels
Selectivity: Between 9.5 and 11.5 mc
Channel 1 - 952 mc
bandwidth at 6 db down from max
Channel 2 - 969 mc
response.
Channel 3 - 986 mc
Power Requirements, ac: 105 to 12.v, 320
Channel 1 - 1003 mc
to 1760 cps, 220 w
Channel 5 - 1020 mc
Channel 6 - 1037 mc
Power Requirements, dc: 24 to 29v, 40 w
Channel 7 - 105,1 mc
at 28v
Channel 8 - 1071 mc
Channel 9 - 1088 mc
INSTALLATION CONSIDERATIONS
Channel 10 - 1100 mc
Channel 11 - 1122 mc
Related Equipments: Used with but not
Channel 12 - 1139 mc
part of Oscilloscope TS-239/1UP, and
AN/APX-6.
Output Signal
Coded rf pulse-pairs spaced:
PRINCIPAL COMPONENTS AND PHYSICAL DATA
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
Radar Receiver-Transmitter
1
RT-19B/IJPX-7
Control Panel C-774/UPX-7
1
Antenna Assembly AS-133/APX
1
3-3/16
9-7/16
7-1/4
1.1
Synchroscope OS-5/U
1
Cable RG-8/U
1
Cables RG-58/U or RG-62/:
2
Connectors UG-59A/U
2
REFERENCE DATA AND LITERATURE
Nomenclature card for AN/UPX-7
TECHNICAL ORDER:
33A1-3-13- Series
AN/UPX-7: 2
Previous Page
