Volume 1
MIL-HDBK-162A
Section 1
15 December 1965
ITEM NAME: RADAR RECOGNITION SET
TYPE: AN/UPX-6X
(adjusted to conform with prr of
RELATION TO SIMILAR EQUIPMENT
associated radar)
Receiver Bandwidth:
AN-UPX-6X is similar to Interrogator Set AN/UPX-2
Broad - 8 to 11 mc, 60 db
without coder and has power input of 60 and 400 cycles
Narrow - 5 mc, 70 db
instead of 400 and 800 cycles. Same as Radar
Receiver Input Impedance: 50 ohms
Recognition Set AN/UPX-6 except blower operates on
Receiver Out put Impedance: 72 ohms
100 cycles only.
Frequency (if.): 60 mc
TECHNICAL DESCRIPTION
INSTALLATION CONSIDERATIONS
Siting: This equipment is located with
Transmitter - 990-1040 mc
the associated radar.
Receiver - 1080-1130 mc
Peak Power Output: 1.5 kw
Mounting: AN/UPX-6X is installed with
Operating Voltages and Power Requirements:
the basic radar.
105, 117 or 125v ac, 60 or 400 cps,
Related Equipments: AN/UPX-6X is used
single ph, 250 w
with, but not part of Radar Sets
Type of Presentation: PPI and B indicators
AN/CPN-4 and AN/CPN-18. Also is used
of associated radar set
with Identification Sets AN/GPX-9,
Pulse Width: 1 usec
AN/GPX-17, AN/GPX-18, AN/GPX-20,
Pulse Repetition Rate: 180 to 420 pps
AN/MPX-7.
PRINCIPAL COMPONENTS AND PHYSICAL DATA
COMPONENT
QTY
HEIGHT
WIDTH
DEPTH
UNIT WT.
(Inches)
(Inches)
(Inches)
Radar Recognition Set
1
11
15
21
77
AN/UPX-64
REFERENCE DATA AND LITERATURE
TECHNICAL ORDERS:
31P1-2UPX6- Series
AN/UPX-6X: 2
Previous Page
