TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-28. REPLACEMENT OF CONTROL UNIT ELECTRICAL CONNECTOR.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Control unit cover off. See
Materials/Parts
Connector, electric, rectangular
NSN 5935-00-439-3748
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
Connector pin (1)
Using flat-tip soldering iron, heat pin and
Electrical
1.
remove lead. Tag lead.
connector
and lead (2)
There are 15 leads. Repeat step 1
for each lead.
2.
Control unit
Screw (3), latch
Using flat-tip screwdriver, remove.
rear panel
spring (4), hex
nut (5), lock-
washer (6) and
flat washer (7)
Using flat-tip screwdriver, remove.
Screw (8), latch
3.
spring (9), hex
nut (10), lock-
washer (11), flat
washer (12) and
terminal lug (13)
Remove.
Connector (14)
4.
2-68
Previous Page
