TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-28. REPLACEMENT OF CONTROL UNIT ELECTRICAL CONNECTOR. (CONT)
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
Using flat-tip soldering iron, heat pin and
Connector pin
1 . Electrical
melt solder into wells.
wells (15)
connector
Put in place.
Connector (14)
2 . Control unit
rear panel
Using flat-tip screwdriver and needle nose
Latch spring (9),
3.
pliers, install.
screw (8), termi-
nal lug (13), flat
washer (12), lock-
washer (11) and
hex nut (10)
Using flat-tip screwdriver and needle nose
Latch spring (4),
4.
pliers, install.
screw (3), flat
washer (7), lock-
washer (6) and
hex nut (5)
Using flat-tip soldering iron, heat pin and
Lead (2) and
5.
insert lead. Remove tag.
connector pin (1)
Do this step for each pin and lead.
EL1BF057
2-69
Previous Page
