TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-33. REPAIR OF RADAR SIGNAL INDICATOR WIRE HARNESS.
This task covers:
Repair
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Radar signal indicator cover off.
See paragraph 2-31.
Materials/Parts
Wire, type E-22, item 6,
Tie-down strap, item 7,
ACTION
ITEM
REMARKS
LOCATION
NOTE
The following procedure shows typical repair. All wires are
repaired in the same way.
1. Radar signal
Lead (1) and
indicator
terminal lug (2)
2. Wire harness
Tie-down strap (3)
Using diagonal cutters, cut tie-down strap
and lead (1)
and remove lead.
3. Radar signal
New lead (4) and
indicator
terminal lug (2)
Install.
4. Wire harness
New lead (4) and
new tie-down
Repeat steps 2 and 4 along wire
strap (5)
harness until old lead is removed and
new lead is installed.
5. Radar signal
Lead (1) and
indicator
terminal lug (2)
New lead (4) and
6.
terminal lug (2)
2-78
Previous Page
