TM 11-5841-283-34-1/NAVAIR 16-30APR39-2
2-34. REPLACEMENT OF RADAR SIGNAL INDICATOR ELECTRICAL CONNECTOR.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, Electronic Equipment TK-105/G
Radar signal indicator cover off.
See paragraph 2-31.
Materials/Parts
Connector, receptacle, electrical
NSN 5935-00-917-0336
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Radar signal
Screws (1)
Using cross-tip screwdriver, remove.
indicator
2.
Electrical
Lift out.
connector (2)
Pins (3) and
Tag leads. Using soldering iron and aid,
3.
leads (4)
heat pins and remove leads.
INSTALLATION
1. Radar signal
Pins (5) and pin
Using soldering iron and aid, heat pins and
indicator
insert solder into pin wells.
wells (6)
2.
Pins (3) and
Using soldering iron and aid, heat pins and
leads (4)
insert leads. Remove tags.
Electrical
Install.
3.
connector (2)
Using cross-tip screwdriver, install.
4.
Screws (1)
2-80
Previous Page
