TM 43-6625-916-12
RADAR TEST SET
0002 00
EQUIPMENT DESCRIPTION AND DATA - Continued
Qty
Item Name
PN:
Item
1
1
Test Set, Radar, TS-4530/UPM
01-1045-70
2
1
Transit Case and Lid
15-5299-01
3
1
Battery Charger/Discharger
01-1045-10
4
1
Cable, KIT/KIR-1C Interface
55-1045-10
5
1
Cable Assembly, RF Direct Connect
55-1045-11
6
1
DC Power Cable
55-1045-14
7
1
AC Adapter
15-0360-M0
8
2
Battery, Sealed, NI-CAD rechargeable (Battery Stick)
43-0012-00
9
1
RS-232 Cable, 9 Pin
55-1045-15
10
1
CD-ROM, Operator Training Software
60-0694-B1
11
1
CD-ROM, Bench Utility Software
60-0694-B5
12
1
Manual, Operation and Maintenance
06-1045-72
13
1
RF Adapter
30-0225-01
14
1
Power Cord
24-7060-10
4.
KIT/KIR-1C Interface Cable For transponder testing, the KIT/KIR-1C interface cable is used to
connect the KIR-1C interrogator computer to the Test Set during code load programming. The cable
provides the necessary interface between the Test Set and KIT-1C when testing interrogators. The Test
Set provides 28 Vdc to power the KIT/KIR-1C computers. The KIT/KIR-1C Interface Cable provides a
power connector for external DC power to operate Test Set and charge Test Set batteries. The
Interface Cable also contains an RS-232 connector to allow an external PC to be connected to the Test
Set.
NOTE
The KIT/KIR-1C interface cable is not compatible with KIT/KIR-1A
computers. Use the optional KIT/KIR-1A cable (PN: 55-1045-16) (not part of
COEI).
5.
Direct Connect RF Cable - The direct connect RF cable is used to connect the Test Set to the
transponder or interrogator during direct connect mode operation.
6.
DC Power Cable - The DC power cable is used in conjunction with the KIT/KIR interface cable to power
the TS-4530/UPM with an external DC power source.
Indoor use only. Do not expose charger or AC adapter to rain or moisture.
7.
AC Adapter - The AC adapter can be used in conjunction with the KIT/KIR interface cable to operate the
TS-4530/UPM on standard AC power. It is also used to supply power to the battery charger/discharger
unit.
Previous Page
