TM 11-5840-281-12-1
4-23.
INTERCONNECTING CABLES. (CONT)
7.
Connect the following cables to master control-indicator as indicated:
a.
Connect P604 of cable W3001 to J604 (1).
b.
Connect P602 of cable W3002 to J602 (2).
c.
Connect P603 of cable W3005 to J603 (3).
d.
Connect P601 of cable W3004 to J601 (4).
e.
Connect P608 of cable W9504 to J608 (5).
f.
Connect P606 of cable W9502 to J606 (6).
g.
Connect P607 of cable W9503 to J607 (7).
h.
Connect P605 of cable W9501 to J605 (8).
8.
Route cables W9501, W9502, W9503, and W9504 from master control-indicator to slave control-indicator.
NOTE
When performing step 9, location of connectors on slave control-indicator are Identical to those on
master control-indicator.
9.
Connect the following cables to slave control-indicator as indicated:
a.
Connect P604A of cable W3001 to J604.
b.
Connect P602A of cable W3002 to J602.
c.
Connect P603A of cable W3005 to J603.
d.
Connect P601A of cable W3004 to J601.
10.
Route cable W3004 from master control-indicator to ac power distribution box.
305NE168
11.
Connect P9602 of cable W3004 to J9602 (9).
12.
Connect P9603 of cable W3007 to J9603 (10).
13.
Route cable W3007 from ac power distribution box to ac power source and connect terminal lugs of cable to ac
power source.
4-51
Previous Page
