TM 11-5840-281-12-1
4-51.
DISASSEMBLY. (CONT)
28.
Loosen three coupling nuts (8) securing elevation horn and polarizer support arms (9, 10, and 11) to elevation
antenna (12).
29.
Loosen two clamps (13) securing cable W9201 to center support arm (10) and free cable.
30.
Obtain cloth sack labeled ELEVATION HORN AND POLARIZER HARDWARE from pad 8 of shipping
31.
Remove six screws (14), lockwashers (15), and flat washers (16) securing elevation horn and polarizer (17) to
elevation horn and polarizer support arms (9, 10, and 11).
32.
Remove two screws (18), lockwashers (19), flat washers (20), and nuts (21) securing clamp (22) of elevation
horn and polarizer (17) to center support arm (10) and remove elevation horn and polarizer. Reassemble clamp
with associated hardware.
33.
Locate elevation horn and polarizer (17) in proximity of shipping drum no. 5 and place screws (14), lockwashers
(15), and flat washers (16) in cloth sack marked ELEVATION HORN AND POLARIZER HARDWARE.
4-163
Previous Page
