TM 11-5840-281-12-1
4-51.
DISASSEMBLY. (CONT)
46.
Obtain cloth sack marked RECEIVER-TRANSMITTER HARDWARE from pad 8 of shipping drum no. 6.
47.
Install vent cover (6) on bottom of receiver-transmitter (7) using six fasteners (8), lock- washers (9), and flat
washers (10).
48.
Remove two screws (11), lockwashers (12), and flat washers (13) attaching each of three strap clamps (14) to
antenna pedestal (15). Place hardware in cloth sack marked RECEIVER-TRANSMITTER HARDWARE.
49.
Using lifting device with suitable weight capacity, carefully lift receiver-transmitter (7) off antenna pedestal (15).
50.
51.
Loosen and remove strap ratchet connected to center section antenna pedestal.
52.
Remove one 6-inch anchor and three 3-inch anchors from ground.
53.
Place strap ratchet in pad 7 and place four anchors in pad 8 of shipping drum no. 6.
54.
Obtain cloth sack marked ANTENNA PEDESTAL HARDWARE from pad 8 of shipping drum no. 6.
4-167