TM 11-5840-281-12-1
4-51.
DISASSEMBLY. (CONT)
39.
Obtain cloth sack marked ELEVATION ANTENNA YOKE HARDWARE from pad 8 in shipping drum no. 6.
40.
While supporting elevation antenna yoke (14), remove four screws (15), lockwashers (16), and flat washers (17)
securing elevation antenna yoke to elevation antenna drive (18). Remove elevation antenna yoke and place in
proximity of shipping frame no. 1.
41.
Place screws, flat washers, and lockwashers in cloth sack marked ELEVATION ANTENNA YOKE HARDWARE.
42.
Remove four screws (19), lockwashers (20), and flat washers (21) securing elevation actuator support arm (22) to
elevation antenna yoke (14). Place screws (19), lockwashers (20), and flat washers (21) in cloth sack marked
ELEVATION ANTENNA YOKE HARDWARE.
4-165
Previous Page
