TM 11-5840-281-12-1
4-51.
DISASSEMBLY. (CONT)
RADAR SET GROUP DISASSEMBLY (CONT)
34.
Install red protective cover (1) over azimuth drive reducer (2) and secure using six
35.
Remove four bolts (4), lockwashers (5), and flat washers (6) securing azimuth drive reducer (2) to azimuth
antenna drive (7).
36.
Obtain cloth sack marked AZIMUTH ANTENNA DRIVE HARDWARE from pad 8 in shipping drum no. 6.
37.
Support azimuth antenna drive (7) and azimuth yoke assembly (8) with necessary manpower or lifting device
with suitable weight capacity and remove four bolts (9), lockwashers (10), flat washers (11), and nuts (12)
securing azimuth antenna drive to elevation antenna drive (13). Carefully lift azimuth antenna drive and azimuth
yoke assembly away from elevation antenna drive and place in proximity of shipping frame no. 2.
38.
Place four bolts (9), lockwashers (10), flat washers (11), and nuts (12) in cloth sack marked AZIMUTH ANTENNA
DRIVE HARDWARE.
4-164
Previous Page
