Table 2-12 Switching Units Internal Jumpers - continued

TM 11-5840-360-14-1-1

Table 2-12 Switching Units Internal Jumpers (Cont'd)

Dual Radar (V3) Jumper List for Four Indicators

(Cont'd)

F. EBL A2A9

1.

Link E2 to E4

1.

Link E2 to E4

2.

Link E8 to E10

2.

Link E8 to E10

3.

Link E13 to E15

3.

Link E13 to E15

4.

Link E16 to E17 (Rev C and up only)

4.

Link E16 to E17 (Rev. C and up only)

5.

Link E19 to E20

5.

Link E19 to E20

G. NSK Exciter A9A2

1. Link E1 to E2

III.

Indicator C (4/5)

IV. Indicator D (4/5)

A. Video Amplifier A2A1

1. a. With EBL remove link E1 to E2

b. Without EBL link El to E2

b. Without EBL link E1 to E2

2. Remove link E3 to E4

B. Data Storage A2A3

1. Remove link E1 to E2

2. Remove link E3 to E4

3. With IR remove link E6 to E7

Without IR link E6 to E7

C. PRF Generator A2A6

1. Link E33 to E35 to a position E17

through E26 (will be changed during

alignment)

2. Link E32 to E34 to a position E17

through E26 (will be changed during

alignment)

3. Link E40 to E36

4. a. Bend pin 4 on U13 (IC socket) (pin

4 disconnected)

b. Without IC socket remove link E50

E51

to E51

5. Link E54 to E17 (may change during

alignment)

6. Link E44 to E46

7. Link E48 to E49

D. VRM A2A7

1. Link E1 to E3

E. Position Transmission A2A8

1. Remove link E1 to E2

2. Install U7

3. Remove R62 and R63 only if

four indicators are used

2-49