TM 11-5841-287-12
(c) Install pallet in bay 1 and lock in
3-13. Cleaning
place by replacing two quick disconnect pins securing
Cleaning the components of the data transmitting set is
pallet retaining brackets to pallet tracks (fig 3-1).
limited to removal of surface stains and dust accumula-
(d) Replace encoder per b(2) above.
tions. Remove surface stains using a lint-free cloth
(e) Replace uhf receiver-transmitter per
moistened with water. Use a mild soap or detergent for
d(2) above.
stubborn stains. Remove dust and other loose material
(f) Connect cable connectors to inter-
using camel's-hair brush or cleaning tissue.
connection box and air pressurization unit per TM 11-
3-14. Testing After Repair
5895-1078-20.
Perform the preflight check as described in paragraph
(g) Connect air line to radar receiver-
transmitter per TM 11-5895-1078-20.
3-7
Previous Page
