TM 11-6625-1831-13
3-4. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (Cont)
This task covers:
Electrical cable maintenance
INITIAL SETUP: Same
W=WEEKLY
M=MONTHLY
Q=QUARTERLY
Procedures
Equipment is
Interval
Item to be
Check for and have repaired
Not Ready/
W
M
Q
Inspected
or adjusted as necessary
Available if:
h
3.
All Cables
Inspect for breaks, cuts, or cracks.
Cable cannot be used.
Replace cable if damaged.
h
4.
Connectors,
Inspect for corrosion, bent pins, or thread
Cable cannot be used.
Jacks, Plugs
damage. Replace cable if damaged.
This task covers:
Test panel maintenance
INITIAL SETUP: Same
h
All Controls
Check for smooth operating action.
5.
Control does not operate
Refer to Direct Support Maintenance for
properly.
repair.
h
All Controls
6.
Check for loose or broken knobs. Refer
Control cannot be set
to Direct Support Maintenance for repair.
because of loose or broken
knob.
3-4