TM 11-5840-281-35/1
(2) Remove 11 nuts (5), screws (6), lockwashers
(8) Remove two screws (24), lockwashers (25),
(7), and flat washers (8).
and flat washers (26).
(3) Remove cover (9) and gasket (10).
(9) Remove two screws (27), lockwashers (28),
(4) Remove two setscrews (11), gear (12), and
flat washers (29), locking strip (30), switch (31), and
ring spacer (13).
switch actuator (32) from bracket (33).
(5) Remove four screws (14), lockwashers (15),
(10) Remove two screws (34), lockwashers (35),
flat washers (16), mounting plate assembly, and gasket
and flat washers (36).
(17).
(11) Remove two screws (37), lockwashers (38),
(6) Remove two screws (18), bushing (19), ring
flat washers (39), locking strip (40), switch (41), and
spacer (20), and gearshaft (21).
switch actuator (42) from bracket (43).
(7) Remove two setscrews (22) and gear (23).
Figure 5-5. Azimuth horn and polarizer, exploded view
5-8
Previous Page
