TM 11-5840-281-35/1
(4) Separate rings (13) from linkage (14).
flat washers (30), and slide phase section (31) out of
(5)
Remove linkage from chokes (15) and
housing.
transitions (16 and 17).
(10) Remove 24 screws (32) and 4 channels (33)
(6) Remove cover (18) from horn (22).
from phase sections.
(7) Remove six screws (19), lockwashers (20), flat
(11) Remove 16 screws (34) and 8 blocks (35)
washers (21) and horn (22) from housing.
from 4 plates (36).
(8) Remove four setscrews (23), three screws (24),
(12) Remove two rings (37) and gaskets (38) from
lockwashers (25), flat washers (26), and slide phase
housing.
section (27) out of housing.
(13) Remove 3 nuts (39), screws (40), 7 screws
(9) Remove three screws (28), lockwashers (29),
(41), 10 lockwashers (42), flat washers (43), cover (44),
and gasket (45).
Figure 5-6. Elevation Antenna AS-1291/TPN-8 and yoke, exploded view (sheet 3 of 3).
5-16
Previous Page
