TM 11-5840-281-35/1
place preformed packing (51) on gearcase housing (61)
housing (61) using four screws (58) and lockwashers
and secure cover (14) to gearcase housing using four
(59).
screws (8), lockwashers (9), and flat washers (10).
(21) Install plug (2) and gasket (3) on gearcase
5-15.
Disassembly and Assembly of Azimuth Drive
housing (61).
Motor
(22) Install plug (1) on cover (39).
(23) Attach instruction plate (60) to gearcase
a Disassembly.
To disassemble azimuth drive
motor, proceed as follows:
Figure 5-10. Azimuth drive gearcase-motor, exploded view.
5-36
Previous Page
