TM 114-4281-35/1
(17) Secure cover (73) to housing (99) using
secure at top using two screws (15), lockwashers (16),
eight screws (57), lockwashers (58), and flat washers
and flat washers (17).
(59).
(20) Attach slide cover (19) to housing (99) at
(18) Place washer (22) on 10356 actuator shaft
bottom with blocks (13 and 14) using two nuts (9),
and screw slide (21) onto shaft.
screws (10), lockwashers (11), and flat washers (12).
(19) Position slide (21) in slot on housing, then
install slide cover (19) on housing (99), and
Figure 5-15. 10-35 actuator assembly, exploded view.
5-52
Previous Page
