TM 11-5840-281-35/1
blue wires from the dc motor should be
(23) Slide filter terminal cover over soldered
matched and soldered to the appropriate
terminals.
color-coded filter terminals. The white
(24) Slide /4 inch pieces of heat shrinkable
wire from the dc motor should be
sleeving over white and green wires of special purpose
soldered to the unmarked center ground
cable (4).
terminal on the filter.
(25) Solder white wire from special purpose
cable (4) to red wire from filter (5).
Figure 5-16. 10-45 actuator, exploded view.
5-56
Previous Page
